|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
SPICE MODEL: PDS5100H PDS5100H 5A HIGH VOLTAGE SCHOTTKY BARRIER RECTIFIER PowerDI a5 Features NEW PRODUCT * * * * * * * * Guard Ring Die Construction for Transient Protection Low Forward Voltage Drop Very Low Leakage Current High Junction Temperature Capability For Use in Low Voltage, High Frequency Inverters, Free Wheeling, and Polarity Protection Applications High Forward Surge Current Capability Lead Free Finish, RoHS Compliant (Note 1) "Green" Molding Compound (No Br, Sb) LEFT PIN RIGHT PIN D b2 L1 A A2 PowerDIa5 Dim A A2 b1 b2 Min 1.05 0.33 0.80 1.70 3.90 6.40 5.30 0.75 0.50 1.20 Max 1.15 0.43 0.99 1.88 4.05 6.60 5.45 0.95 0.65 1.50 E E1 L1 e BOTTOMSIDE b1 HEAT SINK b1 D D2 b2 L A2 D D2 E e E1 3.05 NOM 1.84 NOM 3.55 NOM Mechanical Data * * * * * * * Case: PowerDIa5 Case Material: Molded Plastic, "Green" Molding Compound. UL Flammability Classification Rating 94V-0 Moisture sensitivity: Level 1 per J-STD-020C Terminals: Finish - Matte Tin annealed over Copper leadframe. Solderable per MIL-STD-202, Method 208 e3 Polarity: See Diagram Marking: See Page 3 Weight: 0.077 grams (approx.) Note: Pins Left & Right must be electrically connected at the printed circuit board. E2 E E2 L L1 W W L1 e b1 b1 All Dimensions in mm Maximum Ratings @ TA = 25C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (See also figure 5) Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load Operating and Storage Temperature Range Symbol VRRM VRWM VR VR(RMS) IO IFSM Tj, TSTG Value 100 71 5 250 -65 to +150 Unit V V A A C Thermal Characteristics Characteristic @ TA = 25C unless otherwise specified Symbol RqJS RqJA Typ 3/4 95 Max 2.0 110 Unit C/W C/W Thermal Resistance Junction to Soldering Point Thermal Resistance Junction to Ambient Air (Note 2) Notes: 1. RoHS revision 13.2.2003. Glass and High Temperature Solder Exemptions Applied, see EU Directive Annex Notes 5 and 7. 2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. DS30471 Rev. 14 - 2 PowerDI is a trademark of Diodes Incorporated. 1 of 3 www.diodes.com PDS5100H a Diodes Incorporated Electrical Characteristics @ TA = 25C unless otherwise specified Symbol V(BR)R VF Min 100 3/4 3/4 3/4 3/4 3/4 3/4 Typ 3/4 0.67 0.55 0.74 0.63 0.5 0.5 Max 3/4 0.71 0.58 0.80 0.66 10 4.5 Unit V V mA mA Test Condition IR = 10mA IF = 5A, TS = 25C IF = 5A, TS = 125C IF = 10A, TS = 25C IF = 10A, TS = 125C TS = 25C, VR = 100V TS = 125C, VR = 100V NEW PRODUCT Characteristic Reverse Breakdown Voltage (Note 3) Forward Voltage Reverse Leakage Current (Note 3) Notes: IR 3. Short duration test pulse used to minimize self-heating effect. IF, INSTANTANEOUS FORWARD CURRENT (mA) 100000 10000 IR, INSTANTANEOUS REVERSE CURRENT (nA) 1000 1000 100 Tj = +25C Tj = 150C 100 Tj = 125C 10 10 1 Tj = 85C 1 Tj = -65C 0.1 Tj = 25C Tj = -65C 0.01 0 100 200 300 400 500 600 700 800 900 1000 1100 1200 0.1 0 20 40 60 80 100 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 2 Typical Reverse Characteristics VF, INSTANTANEOUS FORWARD VOLTAGE (mV) Fig. 1 Typical Forward Characteristics IR, INSTANTANEOUS REVERSE CURRENT (mA) 10 800 f = 1MHz 700 1 Tj = +150C CT, TOTAL CAPACITANCE (pF) 600 500 400 300 200 100 0 Tj = +125C 0.1 0.01 Tj = +85C 0.001 0 20 40 60 80 100 VR, INSTANTANEOUS REVERSE VOLTAGE (V) Fig. 3 Typical Reverse Characteristics 0 5 10 15 20 25 30 35 40 VR, REVERSE VOLTAGE (V) Fig. 4 Typical Total Capacitance vs. Reverse Voltage DS30471 Rev. 14 - 2 PowerDI is a trademark of Diodes Incorporated. 2 of 3 www.diodes.com PDS5100H 7.5 Tj = 150C 8 PF(AV), AVERAGE FORWARD POWER DISSIPATION (W) 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9 10 IF(AV), AVERAGE FORWARD CURRENT (A) Fig. 6 Forward Power Dissipation Tj = 150C IPK = 1 (DC) IAV NEW PRODUCT IF, DC FORWARD CURRENT (A) 6.0 4.5 Note 4 3.0 1.5 Note 2 0 0 25 50 75 100 125 150 TA, AMBIENT TEMPERATURE (C) Fig. 5 DC Forward Current Derating 200 TA, DERATED AMBIENT TEMPERATURE (C) 180 160 140 120 100 80 60 40 20 0 0 25 50 75 100 VR, DC REVERSE VOLTAGE (V) Fig. 7 Operating Temperature Derating Note 2 Ordering Information Device PDS5100H-13 Notes: 2. 3. 4. 5. (Note 5) Packaging PowerDIa5 Shipping 5000/Tape & Reel FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf. Short duration test pulse used to minimize self-heating effect. Polyimide PCB, 2 oz. Copper. Cathode pad dimensions 9.4mm x 7.2mm. Anode pad dimensions 2.7mm x 1.6mm. For Packaging Details, go to our website at http://www.diodes.com/datasheets/ap02007.pdf. Marking Information S5100H YYWWK S5100H = Product type marking code = Manufacturers' code marking YYWW = Date code marking YY = Last digit of year ex: 04 for 2004 WW = Week code 01 to 52 K = Factory Designator DS30471 Rev. 14 - 2 PowerDI is a trademark of Diodes Incorporated. 3 of 3 www.diodes.com PDS5100H |
Price & Availability of PDS5100H-13 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |